This is the 11-panel kit with one upgrade that changes everything: a border trim around the perimeter of the arrangement. It's the difference between panels on the ceiling and a ceiling that looks designed. The border frames the whole installation, makes it look intentional, finished, and significantly more expensive than it is.
If you're going to put 11 panels on your ceiling, spend the extra $20 and do it right.
Border vs. No Border, What Actually Changes
The standard 11-panel kit has clean open edges at each panel, great for a modular, expandable look. The W/Border version adds an outer trim that closes the edges of the arrangement, giving the whole piece a framed, gallery-quality finish. Same aluminum frames, same copper wiring, same warranty. Just a different final impression.
Specs
Panel count
11 hexagon panels (4-3-4) with border frame
Assembled size
11'11" W × 8'0" H (143.15" × 95.78")
Lit area
72 sq ft of lit hexagon
Brightness
~50,000 lumens · 6500K daylight white · CRI ≥90
Frames
Aluminum, no sag, no warp
Wiring
Copper, 3-pin locking connector
Ingress rating
IP54
Dimming
Full brightness, fixed (non-dimmable)
Install options
Flush mount (included) or suspended (cable kit)
Warranty
2 years, spare parts included
Tolerance
Assembled sizes are the finished footprint and are accurate to about 2 in. Tube and rail lengths are fixed, so the overall size lands on set increments rather than any dimension you name.
Power Requirements
Total draw
~436W (~4.0A at 110V)
Electrical
Have a licensed electrician confirm the circuit you connect to can carry the load shown above.
All connectors: 120° Y, 2-way, 3-way T, and corners
Power cables, zip ties, and mounting anchors
Spare parts kit
Take It Further with a Suspended Install
Add our Adjustable Coated Cables ($69.99) to float the panel arrangement off the ceiling. Border trim plus suspended cables is the combination that shows up again and again in our install gallery.
